求无边框窗口托动代码
Bob123@163.com 问题点数：100、回复次数：7Top
1 楼Mackz（在相互）回复于 2006-03-15 10:06:25 得分 6
重载CWnd::OnNcHitTest()：
CYourWnd::OnNcHitTest(CPoint point)
{
if (CWnd::OnNcHitText() == HTCLIENT)
return HTCAPTION;
}Top
2 楼Mackz（在相互）回复于 2006-03-15 10:06:48 得分 6
重载CWnd::OnNcHitTest()：
CYourWnd::OnNcHitTest(CPoint point)
{
if (CWnd::OnNcHitText(point) == HTCLIENT)
return HTCAPTION;
}
Top
3 楼Atomictry（天影）回复于 2006-03-15 10:22:57 得分 6
或响应左键按下消息:
void CXXXXDialog::OnLButtonDown(UINT nFlags, CPoint point)
{
PostMessage (WM_NCLBUTTONDOWN, HTCAPTION, MAKELPARAM(point.x, point.y));
}Top
4 楼ydfivy（我就是一送外卖的）回复于 2006-03-15 10:33:26 得分 6
void CMyDlg::OnMouseMove(UINT nFlags, CPoint point)
{
// TODO: Add your message handler code here and/or call default
if (!m_bInWindow)
{
//鼠标指针从窗口外进入窗口的时候,设定一个离开监控,并且将窗口类的鼠标指针设为空
TRACKMOUSEEVENT TrackEvent;
ZeroMemory(&TrackEvent, sizeof(TRACKMOUSEEVENT));
TrackEvent.cbSize = sizeof (TRACKMOUSEEVENT);
TrackEvent.dwFlags = TME_LEAVE;
TrackEvent.hwndTrack = m_hWnd;
_TrackMouseEvent(&TrackEvent);
m_bInWindow = TRUE;
if (GetClassLong(m_hWnd, GCL_HCURSOR))
SetClassLong(m_hWnd, GCL_HCURSOR, NULL);
}
CDialog::OnMouseMove(nFlags, point);
if (nFlags & MK_LBUTTON)
{
HandleSize(point);
}
else
{
HandleCursor(point);
}
//处理窗口改变时产生的刷新消息
MSG msg;
while(::PeekMessage(&msg, NULL, 0, 0, PM_REMOVE))
{
if (msg.hwnd != m_hWnd || msg.message != WM_MOUSEMOVE)
DispatchMessage(&msg);
}
}
int CMyDlg::HandleSize(CPoint point)
{
CPoint ptScreen = point;
ClientToScreen(&ptScreen);
CRect rc, rcWindow;
//根据上一点坐标确定偏移的SIZE
CSize size = ptScreen - m_ptLast;
if (size.cx ==0 && size.cy== 0)
return 0;
rc = m_BackInfo.rc;
int up = m_BackInfo.iUP;
GetWindowRect(rcWindow);
//改变位置和大小——rcWindow是指位置起作用的是左上角，rc是指窗口的大小
switch (m_eSizeMode)
{
case SizeLeftTop:
rcWindow.left += size.cx;
rcWindow.top += size.cy;
rc.right -= size.cx;
rc.bottom -= size.cy;
m_BackInfo.iUP -= size.cy;
break;
case SizeLeftBottom:
rcWindow.left += size.cx;
rc.right -= size.cx;
rc.bottom += size.cy;
m_BackInfo.iUP += size.cy;
break;
case SizeRightTop:
rcWindow.top += size.cy;
rc.right += size.cx;
rc.bottom -= size.cy;
m_BackInfo.iUP -= size.cy;
break;
case SizeRightBottom:
rc.right += size.cx;
rc.bottom += size.cy;
m_BackInfo.iUP += size.cy;
break;
case SizeLeft:
rcWindow.left += size.cx;
rc.right -= size.cx;
break;
case SizeTop:
rcWindow.top += size.cy;
rc.bottom -= size.cy;
m_BackInfo.iUP -= size.cy;
break;
case SizeRight:
rc.right += size.cx;
break;
case SizeBottom:
rc.bottom += size.cy;
m_BackInfo.iUP += size.cy;
break;
case SizeMid:
m_BackInfo.iUP += size.cy;
break;
default:
return 0;
}
//边界检查
if (rc.Width() < 300 || rc.Height() < 300 || rc.bottom - m_BackInfo.sizeTopLeft.cy - m_BackInfo.iUP - m_BackInfo.sizeMidLeft.cy - m_BackInfo.sizeBottomLeft.cy < 28)
{
m_BackInfo.iUP = up;
return -1;
}
m_ptLast = ptScreen;
//这两句好像可以去掉
if (m_eSizeMode == SizeMid)
ResetCtrlPos();
//重新生成窗口
CombineWindow(CPoint(rcWindow.left, rcWindow.top), rc);
Invalidate(FALSE);
UpdateWindow();
return 0;
}
void CMyDlg::HandleCursor(CPoint point)
{
if (PtInRect(&m_BackInfo.rcLeftTopEdge, point))
{
m_eSizeMode = SizeLeftTop;
SetCursor(LoadCursor(NULL, MAKEINTRESOURCE(IDC_SIZENWSE)));
}
else if (PtInRect(&m_BackInfo.rcRightTopEdge, point))
{
m_eSizeMode = SizeRightTop;
SetCursor(LoadCursor(NULL, MAKEINTRESOURCE(IDC_SIZENESW)));
}
else if (PtInRect(&m_BackInfo.rcLeftBottomEdge, point))
{
m_eSizeMode = SizeLeftBottom;
SetCursor(LoadCursor(NULL, MAKEINTRESOURCE(IDC_SIZENESW)));
}
else if (PtInRect(&m_BackInfo.rcRightBottomEdge, point))
{
m_eSizeMode = SizeRightBottom;
SetCursor(LoadCursor(NULL, MAKEINTRESOURCE(IDC_SIZENWSE)));
}
else if (PtInRect(&m_BackInfo.rcLeftEdge, point))
{
m_eSizeMode = SizeLeft;
SetCursor(LoadCursor(NULL, MAKEINTRESOURCE(IDC_SIZEWE)));
}
else if (PtInRect(&m_BackInfo.rcTopEdge, point))
{
m_eSizeMode = SizeTop;
SetCursor(LoadCursor(NULL, MAKEINTRESOURCE(IDC_SIZENS)));
}
else if (PtInRect(&m_BackInfo.rcRightEdge, point))
{m_eSizeMode = SizeRight;
SetCursor(LoadCursor(NULL, MAKEINTRESOURCE(IDC_SIZEWE)));
}
else if (PtInRect(&m_BackInfo.rcBottomEdge, point))
{
m_eSizeMode = SizeBottom;
SetCursor(LoadCursor(NULL, MAKEINTRESOURCE(IDC_SIZENS)));
}
else if (PtInRect(&m_BackInfo.rcMid, point))
{
m_eSizeMode = SizeMid;
SetCursor(LoadCursor(NULL, MAKEINTRESOURCE(IDC_SIZENS)));
}
else
{
m_eSizeMode = SizeNULL;
SetCursor(LoadCursor(NULL, MAKEINTRESOURCE(IDC_ARROW)));
}
}
Top
5 楼ydfivy（我就是一送外卖的）回复于 2006-03-15 10:33:38 得分 6
LRESULT CMyDlg::OnMouseLeave(WPARAM wparam, LPARAM lparam)
{
//将窗口类指针设为原来的
SetClassLong(m_hWnd, GCL_HCURSOR, (long)LoadCursor(NULL, MAKEINTRESOURCE(IDC_ARROW)));
m_bInWindow = FALSE;
return 0;
}
void CMyDlg::OnLButtonDown(UINT nFlags, CPoint point)
{
// TODO: Add your message handler code here and/or call default
if (m_eSizeMode != SizeNULL)
{
SetCapture();
POINT pt;
GetCursorPos(&pt);
m_ptLast = pt;
}
else
PostMessage(WM_NCLBUTTONDOWN, HTCAPTION, MAKELPARAM(point.x,point.y));
//CDialog::OnLButtonDown(nFlags, point);
}
void CMyDlg::OnLButtonUp(UINT nFlags, CPoint point)
{
// TODO: Add your message handler code here and/or call default
if (GetCapture() == this)
ReleaseCapture();
//在鼠标抬起的时候再改变一次大小
HandleSize(point);
CDialog::OnLButtonUp(nFlags, point);
}
Top
6 楼0011411（爱也许是假的，可是当时的快乐是真的。）回复于 2006-03-15 10:44:14 得分 2
顶!!~~~!Top
7 楼unionize（同盟会）回复于 2006-03-15 17:08:43 得分 68
OnNcHitTest 或者 OnMouseMove,有区别，完整代码已发送Top
相关问题
关键词
得分解答快速导航
相关链接
广告也精彩
反馈
